Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in a Volvo S80?

Model: Volvo S80 MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

This tutorial shows how to replace the position light bulbs in a Volvo S80, a very simple operation. First, ensure the key is not inserted, then open the bonnet and remove the two vertical metal pins, which are the only two fixing elements of the headlight.

Once done, grasp the headlight, pull it towards you, and remove it from the bodywork. Optionally disconnect the power connector, remove the outer circular cap, and proceed with replacing the bulb in question.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Replacing the Position Bulbs on a Volvo S80
Replacing the Position Bulbs on a Volvo S80
Volvo S80 (2006-2016 / MK 2) Replacing the position lights on a Volvo S80 is really straightforward, a maintenance task suitable for everyone, even the less experienced. To do th…
Replacement of Dipped Beam Headlight Bulb
Replacement of Dipped Beam Headlight Bulb
Volvo S80 (1998-2006 / ) Having a blown bulb can be very inconvenient and costly, especially as it may lead to a fine from the authorities. Therefore, it is always wise to ca…
How to replace the rear light of the Volvo S80?
How to replace the rear light of the Volvo S80?
Volvo S80 (2006-2016 / MK 2) To replace the rear light of the Volvo S80, open the boot lid and loosen the knobs that allow you to lower the internal covers, giving access to the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos