Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Brake Pads and Discs on a Volvo V50

Model: Volvo V50 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake pads

Video tutorial

Today we will discover the instructions that will allow us to remove and replace the front brake pads and discs on a Volvo V50. First, lift the vehicle and begin to remove the front wheel; then unscrew the bolts of the front brake caliper to remove it from the disc, as shown in the video.

At this point, apply pressure to the caliper piston to remove the old pads, cleaning the caliper of any residual dirt; unscrew the bolts of the brake disc to remove and replace it as well, finally installing the new brake pads.


Posted on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Headlights in the Volvo V50?
How to Replace the Headlights in the Volvo V50?
Volvo V50 (2004-2012 / MK 1) Replacing the headlights in the Volvo V50, as shown in this tutorial, is a very simple and quick task. First, ensure the key is not in the ignition f…
How to Remove the Front Bumper on a Volvo V50
How to Remove the Front Bumper on a Volvo V50
Volvo V50 (2004-2012 / MK 1) In a few simple steps, we will see how to remove and replace the front bumper on a Volvo V50. First, open the car's bonnet and start unscrewing all t…
Where are the Fuses on the Volvo V50?
Where are the Fuses on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) The fuses on the Volvo V50 are located inside the designated fuse boxes, and their positions are identical to those in the Volvo S40. This car model …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos