Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Alternator

Model: Volvo S80 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Alternator

See other generations:
Video tutorial

When the alternator fails, the battery charge warning light illuminates on the dashboard: you must replace it as soon as possible since the remaining mileage is limited to the battery's capacity. Before proceeding with the alternator removal, disconnect the battery; remove the intake manifold hose for easier access to the auxiliary belt tensioner and loosen it by sliding off the belt.

Then, unscrew the fixing bolts of the power steering pump and move the various hoses to gain free access to the alternator. Disconnect the cables attached to it and the fixing bolts to remove it from its position and install the new one (it is recommended to choose a refurbished product).

Proceed in reverse for installation, also replacing the auxiliary belt.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Volvo S80
How to Remove the Steering Wheel from a Volvo S80
Volvo S80 (1999-2006 / MK 1) In this brief guide, you will discover the instructions to dismantle and remove the steering wheel from a Volvo S80 in simple steps. First, get into …
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Volvo S80 (1998-2006 / ) Open the front bonnet and remove the plastic cover on top of the engine, secured with Torx screws: it is advisable to perform these operations with a…
Replacing Spark Plugs on the Volvo S80 2.5L
Replacing Spark Plugs on the Volvo S80 2.5L
Volvo S80 (1999-2006 / MK 1) Follow these instructions to remove and replace the engine spark plugs on the Volvo S80 with a 2.5-litre engine. First, open the bonnet of the vehicl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos