Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : How to replace the serpentine belt in the Volvo V70?

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: V-belt
Operation: How to replace the serpentine belt in the Volvo V70?

In this tutorial, we can see how to replace the service belt in the Volvo V70, a very simple and quick operation. First of all, we wait for the engine to be sufficiently cool to operate safely, then we open the hood and locate the belt in question, located on the right side of the engine. Next, we find a long 90-degree wrench, insert a Torx T55 bit into it, and, gripping the belt tensioner with the appropriate bolt, we loosen the tension in the belt in order to remove it. By following the same technique, it will be possible to install the replacement, obviously respecting its pattern.


Posted on 26 September 2023 by ScegliAuto



Guide to replacing the timing belt of the Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's briefly go through the instructions that will allow us to disassemble and replace the timing belt of the Volvo V70. First, we open the hood and
How do you replace the timing belt of the Volvo V70?
Volvo V70 (2000-2007 / MK 2) The replacement of the timing belt on the Volvo V70 is done by opening the hood and removing the protective panel located on the left side of the eng
How do you replace the timing belt of the Volvo V70?
Volvo V70 (2000-2007 / MK 2) To replace the timing belt of the Volvo V70, you need to open the hood and remove the protective cover located on the left side of the engine block:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos