Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Tire pressure warning light

The tire pressure warning light reset operation on the Volvo XC90 involves first inflating the tires to the correct pressure value: this value is indicated on the sticker located on the driver's side door pillar. Once the tires have been inflated, it will be possible to connect a diagnostic tool to the vehicle's OBD port, located under the steering column: by doing so, it will be possible to reset the error that causes the light to come on. Finally, the scanner can be disconnected to verify that the reset has been successful.

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a Volvo XC90?
How to Reset the Tire Pressure Light on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To reset the tire pressure light on a Volvo XC90, first inflate the tires to the correct pressure. This value is indicated on the sticker attached to…
Reset the Tire Pressure Light on the Volvo XC90
Reset the Tire Pressure Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Here’s how to reset the tire pressure light on the Volvo XC90. Before recalibrating the TPMS sensors, ensure that all four tires are at the recommend…
How to Reset the Tire Pressure Light on a Volvo XC90?
How to Reset the Tire Pressure Light on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To completely turn off the tire pressure light on a Volvo XC90, you need to inflate the tires to the optimal value: this value is listed on the stick…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos