Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the spark plug of the Yamaha Xmax 125, you will need to open the underseat compartment so that the lining inside can be removed: to do this, all the screws holding it in place will need to be loosened and once they are all loosened, the lining can be removed. This way, the components in the top part of the engine can be identified and in particular, the coil will need to be disconnected: the spark plug below can now be removed from its seat using a socket wrench. At this point, it will be possible to insert the new one and check that everything is functioning properly.

Posted on 5 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Xmax 125 It will be possible to replace the battery of the Yamaha Xmax 125 by loosening the screws that secure the windshield of the motorcycle to its housing…
Xmax 125 Shortly we will see the steps that will allow us to adjust the time of the Yamaha Xmax 125 scooter, but also of the Xmax 250. First, we put the scoot…
Xmax 125 In this tutorial we can see how to reset the service on the Yamaha XMAX 125 scooter, an extremely simple and quick operation, to be carried out only …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos