Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The following instructions will allow us to reset the service light for the regular maintenance of the engine oil change for the Yamaha Xmax 125 scooter. First, we put the scooter on the stand and start the instrument panel; then we go to the service option and press the button located at the top right of the panel for three seconds, as shown in the video. We will see the service light flashing, then release the button and hold it down for another fifteen seconds; finally, turn off the instrument panel to complete the reset operation!

Posted on 4 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on a Yamaha Xmax 125
Resetting the Service Light on a Yamaha Xmax 125
Xmax 125 Today, let's discover the procedure to reset the service light for the regular maintenance oil change on the Yamaha Xmax 125 scooter. First, place it…
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
Xmax 125 The V-Belt indicator of the Yamaha Xmax 125 can be reset by turning on the instrument panel, inserting the ignition key into the corresponding block:…
How to Reset the Service Light on a Yamaha Xmax 125
How to Reset the Service Light on a Yamaha Xmax 125
Xmax 125 To reset the Service light on the Yamaha Xmax 125, turn the ignition key to switch on the instrument panel. Once the panel is on, navigate the menu u…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos