Do it yourself
Frequently asked questions about cars and motorcycles
The reset of the V-Belt warning light that appears on the instrument panel of the Yamaha Nmax can be done by turning on the instrument panel, turning the ignition key inside the corresponding block: once the panel is turned on, you will need to press the SELECT button repeatedly until the total mileage appears. Once the kilometers traveled are shown, you will need to hold down the RESET button so that the V-Belt warning light stops flashing, disappearing completely from the screen. Once the procedure is done, you can turn off the instrument panel by turning the key in the opposite direction.

Posted on 28 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Nmax In the Yamaha NMAX scooter, the V-Belt light indicates the need to perform maintenance on the transmission belt after exceeding the recommended inter…
Nmax In this tutorial, you will learn how to reset the transmission belt change light on a Yamaha Nmax scooter in simple steps. First, place the scooter o…
Nmax Today's instructions will show us how to reset the transmission belt change reminder on the Yamaha Nmax scooter. First, we put the scooter on the cen…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos