Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Mt 10
Part: Engine oil

In this tutorial, we will see how to replace the engine oil in the Yamaha MT-10, a very simple and quick operation. First of all, we need to wait until the engine is sufficiently cool. After that, we position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket wrench. We then let all the oil in the system drain out, unscrew the old filter using pliers, and tighten both the replacement filter and the bolt. At this point, all that’s left to do is to pour in the necessary amount of oil through the designated upper hole.

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Mt 10 Today, we will go through the necessary guide on how to perform routine maintenance by changing the engine oil and oil filter on the Yamaha MT-10. Fi…
Mt 10 This brief guide illustrates how to perform routine maintenance by changing the engine oil and oil filter on a Yamaha MT-10. First, place the bike on…
Mt 10 To change the engine oil on the Yamaha MT-10, you need to unscrew the oil drain plug, located at the central lower part of the bike; you will need to…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos