|
Do it yourself
| |||
| ||||
How to Replace the Coolant on the Yamaha YZ 125
Model: Yamaha Yz 125
Video tutorial
Today we will discover the main steps on how to replace the coolant in the engine of the Yamaha YZ 125 motorcycle. First, place the motorcycle on a stand and begin to unscrew the drain screw of the water pump, allowing the coolant to drain into a container for about ten minutes; then unscrew the radiator cap and top up with the new coolant of the correct type, as shown in the video. Ensure that the level in the reservoir is at the maximum mark; start the engine and top up again if necessary.
Posted on 15 March 2026 by ScegliAuto
Related tutorials
Yz 125
Changing the engine oil in a Yamaha YZ 125 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a container…
Yz 125
Discover in this video how to remove and replace the air filter of the engine on the Yamaha YZ 125 enduro bike, following these simple and quick step…
Yz 125
To replace the exhaust on a Yamaha YZ 125, loosen the screws securing the panel on the side of the vehicle to access the exhaust underneath. Once the…
|
How to Set the Clock on the Kymco Agility?
To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
