Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Yamaha Majesty 400

Model: Yamaha Majesty 400
Part: Service warning light

Video tutorial

Manually resetting the engine oil light on your Yamaha Majesty 400 is very simple and takes just a few seconds. There is no need to consult your trusted mechanic, and the entire operation is within anyone's reach.

First, ensure the engine and ignition are off. Next, locate the button beneath the speedometer and press it. While holding it down, insert the key and turn on the ignition. After about 4 seconds, release the button and press it once more immediately after.

At this point, the reset is complete, and the warning light has disappeared permanently.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Yamaha Majesty 400
How to Reset the Oil Light on a Yamaha Majesty 400
Majesty 400 If you have just changed the oil on your 2009 Yamaha Majesty 400 but the warning light continues to illuminate, you need to perform the following man…
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…
How to Change the Engine Oil in a Yamaha Majesty 400 Scooter?
How to Change the Engine Oil in a Yamaha Majesty 400 Scooter?
Majesty 400 In this tutorial, you will see how to change the engine oil in a Yamaha Majesty 400 scooter, a very simple and quick operation. First, ensure that th…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos