Do it yourself
Frequently asked questions about cars and motorcycles
If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be able to reset it manually without any issues. First, completely turn off your Majesty 400 and place it on its stand. Next, remove the rear plastic by acting on the clips present, and once done, locate and disconnect the white electrical pin for about 4-5 seconds. After the wait, reconnect the electrical pin and reassemble the previously removed plastic to complete the procedure.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Majesty 400 In this tutorial we can see how to reset the V-Belt warning light on the Yamaha Majesty 400 scooter, an extremely simple and quick operation, to be c…
Majesty 400 To replace the belt on the Yamaha Majesty 400, start by loosening the screws that secure the cover positioned on the left side of the bike, near the …
Majesty 400 Manually resetting the engine oil light on your Yamaha Majesty 400 is very simple and takes just a few seconds. There is no need to consult your trus…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos