Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha T Max
Part:

In this video tutorial, follow the main steps to dismantle and replace the timing chain, remove the camshaft, and adjust the valve clearance. Focus primarily on replacing the timing chain; first, remove the entire bodywork of your scooter to access the front of the engine. At this point, remove the camshaft to dismantle and replace the timing chain, as shown in the video; take all necessary references for the correct replacement of the chain, following the video to the end!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the drive chain tensioner of the Yamaha T-Max.
Replacement of the drive chain tensioner of the Yamaha T-Max.
T Max Today's main instructions will show us how to disassemble and replace the chain tensioner of the transmission chain of the Yamaha T-Max scooter. Firs…
Instructions for Replacing the Coolant on the Yamaha T-Max 500
Instructions for Replacing the Coolant on the Yamaha T-Max 500
T Max This guide provides the main instructions for replacing the coolant or antifreeze on the Yamaha T-Max 500. First, remove the side fairings located at…
Battery Replacement for the Yamaha T-Max 500
Battery Replacement for the Yamaha T-Max 500
T Max In this brief and simple guide, you will find the main instructions for removing and replacing the battery of the Yamaha T-Max 500 scooter. First, mo…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos