Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Fuel Pump on a Yamaha Majesty 400

Model: Yamaha Majesty 400
Part: Fuel pump

Video tutorial

In this guide, you will find the main instructions for removing and replacing the fuel pump on the Yamaha Majesty 400 scooter. First, remove the seat and the entire under-seat compartment of the scooter to access the top of the engine; then unscrew the bolts of the tank and the screws of the engine support frame, lifting it from below with a jack.

At this point, lift the engine and unscrew the bolts of the fuel pump, disconnecting the electrical connector and the fuel hose; then replace it with the new one, applying the reverse procedure!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on the Yamaha Majesty 400
How to Replace the Fuel Pump on the Yamaha Majesty 400
Majesty 400 To replace the fuel pump on the Yamaha Majesty 400, you need to loosen the screws that secure the fuel tank to its housing: once this has been remove…
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…
How to remove the engine block from the frame of the Yamaha Majesty 400.
How to remove the engine block from the frame of the Yamaha Majesty 400.
Majesty 400 Today we will discover the instructions that will allow us to disassemble and remove the engine from the frame of the Yamaha Majesty 400 scooter. Fir…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos