Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs on a Yamaha Xmax 400?

Model: Yamaha Xmax 400
Part: Light bulb

Video tutorial

A simple way to replace the front bulbs on a maxi-scooter like the Yamaha Xmax 400 is to reach under the front shield and work "blindly". However, this is not easy for those with less experience, who are advised to follow the procedure shown in the video.

Although it is longer and more labour-intensive, it allows you to replace the bulbs without going to a mechanic.

This involves completely removing the front shield by unscrewing all the screws indicated in the video, so you can access the bulb holder and replace the bulbs without too much difficulty.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Yamaha XMAX 400?
How to Set the Time on a Yamaha XMAX 400?
Xmax 400 In this tutorial, you will see how to set the time on a Yamaha XMAX 400, a very simple and quick operation to perform, for example, after disconnecti…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Today we will discover the instructions that will allow us to reset the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the sc…
How to reset the belt service on the Yamaha XMAX 400 scooter?
How to reset the belt service on the Yamaha XMAX 400 scooter?
Xmax 400 In this tutorial, we can see how to reset the belt service on the Yamaha XMAX 400 scooter, an extremely simple and quick operation. This service is i…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos