Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for replacing the timing chain on a Yamaha Tmax

Model: Yamaha Tmax 500
Part:

Video tutorial

In this guide, we will discover the instructions that will allow us to dismantle and replace the timing chain on the Yamaha Tmax 500 scooter. First, place the scooter on its centre stand and start by disconnecting the exhaust manifold from the cylinders by undoing the nuts; then drain the engine oil. Next, remove the spark plugs to subsequently take off the cylinder head cover, allowing access to the tappets and timing chain.

Take the necessary references for replacing the belt, following the video to the end!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Change the engine oil and oil filter on the 2017 Yamaha Tmax SX
Change the engine oil and oil filter on the 2017 Yamaha Tmax SX
Tmax 500 In this video tutorial, you will see step-by-step instructions for performing the service, which includes changing the engine oil and oil filter, on …
How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
Tmax 500 As shown in this tutorial, resetting the oil service on the Yamaha TMAX 500 scooter is an extremely simple and quick operation. Before proceeding, en…
Replacing the Drive Belt on a Yamaha Tmax 500
Replacing the Drive Belt on a Yamaha Tmax 500
Tmax 500 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Tmax 500 scooter. First, place it on the centre sta…

How to replace the headlight bulb on a Ducati Monster 696

In this guide, discover how to remove and replace the headlight bulb on a Ducati Monster 696. First, place the bike on a stand and begin unscrewing the rear screws of the headlight to lower it for access to the rear lights; then remove the plastic cap and disconnect the electrical connector of the dipped beam bulb, removing it and replacing it with the new one (of the correct type and with the same fitting). At this point, reassemble the headlight unit, securing it properly, and check that all lights are functioning!

Watch the video!


by ScegliAuto

More videos