Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Indicator Bulbs on a Yamaha Majesty 400

Model: Yamaha Majesty 400
Part: Light bulb

Video tutorial

To replace the side indicator bulbs on a Yamaha Majesty 400, loosen the screws securing the front fairing of the motorcycle so that it can be completely removed along with the windscreen. Once these two parts are removed, you can pull the side indicator units from their housings by unscrewing the corresponding screws.

Then, remove the bulbs inside and replace them with new spare parts; after installation, reposition the indicator units and the front fairing with the windscreen.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb on a Yamaha Majesty 400?
How to Replace the Indicator Bulb on a Yamaha Majesty 400?
Majesty 400 How to replace the indicator bulb on a Yamaha Majesty 400? First, unscrew the two screws located under the plastic windscreen to remove it; if you en…
Replacing the Indicator Bulb on a Yamaha Majesty 400
Replacing the Indicator Bulb on a Yamaha Majesty 400
Majesty 400 In this video, you will see how to replace the front indicator bulb on a Yamaha Majesty. To perform this operation, first gather plastic trim tools: …
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos