Do it yourself
Frequently asked questions about cars and motorcycles

How to Create a Phone Mount on a Yamaha Tracer

Model: Yamaha Tracer 900
Part:

Video tutorial

In today's video, you will learn how to create a phone mount on a Yamaha Tracer. Follow these steps: obtain a 20 cm stick.

Cut it to 5.5 cm, drilling holes on both sides; do the same at the bottom of the handle that adjusts the height of the fairing. Remove the white sleeve and insert the rubber plugs.

Insert the rubber sleeve of the phone holder. Proceed to insert the mount.

Use 40 mm long screws and then add spacers. Finally, assemble everything and check the correct operation by inserting your phone.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

Tracer 900 In this tutorial, you will see how to remove the seat on the Yamaha Tracer 900, a very simple and quick operation, for example, if you need to replac…
Tracer 900 If the display on your Yamaha Tracer 900 shows a different time than the correct one and you want to change it manually, simply read the following gu…
Tracer 900 This guide outlines the main steps to remove and replace the rear wheel and tyre of the Yamaha Tracer 900 motorcycle. First, place the bike on its ce…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos