Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. :
  3. Xmax 250
    4. : Where is the battery located in the Yamaha XMAX 250 scooter and how to replace it?

Model: Yamaha Xmax 250
Part: Battery
Where is the battery located in the Yamaha XMAX 250 scooter and how to replace it?

In this video we can see where the battery is located in the Yamaha XMAX 250 scooter and how to replace it, an extremely simple and fast operation. As shown, it is located at the front of the scooter, just below the handlebars. To access it, first of all unscrew each fastening screw of the plastic front panel, then remove it by levering it along the entire perimeter with a spatula. Once this is done, unscrew the screws of the battery holding belt, extract it from the housing and disconnect both terminals, always starting from the negative. To assemble the spare part, we follow the reverse procedure.


Posted on 11 April 2023 by ScegliAuto



How to disassemble the battery in the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, we can see how to remove the battery in the Yamaha XMAX 250 scooter, a very simple and fast operation. Before proceeding, make sure
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, we can see how to adjust the time on the Yamaha XMAX 250 scooter, an extremely simple and quick operation to be carried out, for ex
How to reset the service on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial we can see how to reset the oil service on the Yamaha XMAX 250 scooter, an extremely simple and quick operation. Before proceeding,

How to replace the headlight bulb on Yamaha Xj6

In today's video tutorial we will see how to remove and replace the headlight bulb of the Yamaha Xj6 600 motorcycle, in simple and quick steps. First, let's turn the handlebar to access the inside of the headlight; then we remove the rubber cover, disconnecting the electrical connector of the bulb, as shown in the video. At this point we disconnect the metal clip to remove and replace the bulb with the new one, of the right type (in this case the H4 type); insert it in the correct direction and hook it perfectly inside the lighthouse!

Watch the video!


by ScegliAuto

More videos