Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Sz 150
Part: Push button

In this tutorial, see how to replace the stop switch on a Yamaha SZ 150, an extremely simple and quick operation. First, position yourself on the right side of the bike, then remove the side panel by unscrewing all the respective screws. Next, unscrew the mounting bolts of the brake mechanism, separate it from the frame, and disconnect the control cable. At this point, remove the switch by unscrewing it from the bracket, disconnect the connector, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Yamaha TFX 150?
How to Replace the Front Brake Pads on the Yamaha TFX 150?
Tfx To replace the front brake pads on the Yamaha TFX 150, loosen the two bolts securing the brake caliper to the disc using an Allen key. Once the bolts…
How to Replace the Spark Plug in a Yamaha FZ 150
How to Replace the Spark Plug in a Yamaha FZ 150
Fz 150 In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engin…
How to Replace the Battery on a Yamaha Sniper 150?
How to Replace the Battery on a Yamaha Sniper 150?
Sniper 150 To replace the battery on a Yamaha Sniper 150, loosen the screws that secure the seat to its housing so that it can be completely removed, giving acc…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos