Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light switch of the Mercedes E-Class.

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the stop light switch of the Mercedes E-Class. First, let's get inside the vehicle on the driver's side and start by removing the plastic cover located at the bottom by unscrewing the fastening screws.

Next, we will remove the stop light switch by disconnecting its electrical connector, as shown in the video. At this point, we will install the new original switch, securing it properly and making the electrical connection.

Finally, we will reattach the plastic cover!


Posted on 16 December 2025 by ScegliAuto


Related tutorials

How to Replace the Brake Pedal Switch on a Mercedes E-Class?
How to Replace the Brake Pedal Switch on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) To replace the brake pedal switch on a Mercedes E-Class, loosen the bolts that secure the cover located under the steering column and above the pedal…
How to Replace the Brake Pedal Switch on a Mercedes E-Class?
How to Replace the Brake Pedal Switch on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) To replace the brake pedal switch on a Mercedes E-Class, remove the plastic panel located between the steering column and the pedals. By loosening th…
How to Replace the Brake Light Switch on Mercedes E-Class W210
How to Replace the Brake Light Switch on Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) In today's video, we will see the main steps to remove and replace the brake pedal switch on a Mercedes Benz E-Class W210. First, open the front door…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos