Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pedal Switch on a Mercedes E-Class?

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the brake pedal switch on a Mercedes E-Class, remove the plastic panel located between the steering column and the pedals. By loosening the screws that secure this panel, you can access the brake pedal switch, which must be disconnected from its connector and rotated to extract it. The part should then be replaced with a new one, which needs to be inserted into its housing and connected to the appropriate connector.

After the replacement, close the panel by securing it with its screws.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pedal Switch on a Mercedes E-Class?
How to Replace the Brake Pedal Switch on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. replace the brake pedal switch on a Mercedes E-Class, loosen the bolts that secure the cover located under the steering column and above the pedals... …
How to Replace the Brake Light Switch on Mercedes E-Class W210
How to Replace the Brake Light Switch on Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) .. the brake pedal switch on a Mercedes Benz E-Class W210. First, open the front door and remove the plastic cover above the pedals by unscrewing the.. …
How to replace the brake light switch of the Mercedes E-Class.
How to replace the brake light switch of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. replace the stop light switch of the Mercedes E-Class. First, let's get inside the vehicle on the driver's side and start by removing the plastic cover.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos