Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the V-Belt Light on the Yamaha Xmax 250?

Model: Yamaha Xmax 250
Part: Warning light – error code

Video tutorial

To reset the V-Belt light on the Yamaha Xmax 250, insert the key into the ignition switch and turn it to power on the instrument panel. To turn off the light, pull in the lever located at the base of the right handlebar grip.

While holding this lever, the light will start to flash until the kilometres remaining until the next replacement are reset. Once the kilometres have increased, you can release the lever and at the end of this operation, you can turn off the instrument panel.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Reset the V-Belt Light on a Yamaha Xmax 250
How to Reset the V-Belt Light on a Yamaha Xmax 250
Xmax 250 .. To reset the V-Belt light on the Yamaha Xmax 250, turn on the instrument panel by rotating the key in the ignition switch... …
How to Reset the V-Belt Light on a Yamaha Xmax 250?
How to Reset the V-Belt Light on a Yamaha Xmax 250?
Xmax 250 .. To reset the V-Belt light on the Yamaha Xmax 250, insert the key into the ignition and turn it to activate the instrument.. …
How to Reset the V-Belt Light on the Yamaha Xmax 250?
How to Reset the V-Belt Light on the Yamaha Xmax 250?
Xmax 250 .. To reset the V-Belt light on the Yamaha Xmax 250, you need to disconnect the connector related to the sensor that monitors.. …

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos