Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Yamaha XMAX 300 Scooter?

Model: Yamaha Xmax 300
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the oil service on a Yamaha XMAX 300 scooter, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument cluster, not the engine, then scroll through the display screens until you reach the one showing the service mileage in question.

Once done, press the right selector to the left and hold it for 15 seconds, or for the time necessary for the interval to reset correctly.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to reset the oil service on the Yamaha XMAX 300 scooter?
How to reset the oil service on the Yamaha XMAX 300 scooter?
Xmax 300 In this tutorial, you will see how to reset the oil service on the Yamaha XMAX 300 scooter, a very simple and quick operation. Before proceeding, ens…
How to Reset the Oil Service on the Yamaha XMAX 300 Scooter?
Xmax 300 In this tutorial, you will see how to reset the engine oil service on the Yamaha XMAX 300 scooter, a very simple operation that should only be perfor…
How do you reset the Service light on the Yamaha Xmax 300?
How do you reset the Service light on the Yamaha Xmax 300?
Xmax 300 It will be possible to delete the Oil Service light of the Yamaha Xmax 300 by turning on the instrument panel, so that you can navigate through the m…

How to Replace the Headlight Bulb on a Honda CBR 300?

To replace the headlight bulb on a Honda CBR 300, start by turning the handlebars in the opposite direction to the side where you need to replace the bulb to facilitate access. Next, remove the internal rear cover of the headlight, which is usually secured with screws or clips. Once the cover is removed, you will have access to the bulb. Gently disconnect the electrical connector from the bulb, then turn the bulb counterclockwise to unlock it from the holder. Carefully pull the bulb out of the holder and replace it with a new bulb of the same type and model. Ensure the new bulb is correctly installed in the holder and reconnect the electrical connector. Finally, replace the internal rear cover of the headlight and secure it firmly with the screws or clips. Return the handlebars to their original position, and the job is complete.

Watch the video!


by ScegliAuto

More videos