|
Do it yourself
| |||
| ||||
|
Model: Yamaha Xmax 300
In this tutorial, you will see how to reset the oil service on the Yamaha XMAX 300 scooter, a very simple and quick operation. Before proceeding, ensure you have completed the required scheduled maintenance work. Start by inserting the key and turning on the instrument panel, then navigate to the general menu and go to the settings section. Next, enter "Information/reset", then "Maintenance reset", and select "Oil". At this point, simply confirm the reset, restart the panel, and check that the operation was successful.
Updated on 21 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Xmax 300
In this tutorial, you will see how to reset the engine oil service on the Yamaha XMAX 300 scooter, a very simple operation that should only be perfor…
Xmax 300
In this tutorial, you will see how to reset the oil service on a Yamaha XMAX 300 scooter, a very simple and quick operation to perform only after com…
Xmax 300
It will be possible to delete the Oil Service light of the Yamaha Xmax 300 by turning on the instrument panel, so that you can navigate through the m…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
