Do it yourself
| ||||
|
Model: Yamaha Xmax 250
On the Yamaha Xmax 250, in order to reset the V-Belt warning light, you need to insert the key into its lock and turn it until the instrument panel lights up. To reset the warning light, you will need to pull the lever located at the base of the right handlebar grip towards the inside. While holding the lever, the light will start flashing until the remaining kilometers until the next replacement are reset. Once the kilometers have been increased, you can release the lever and complete the procedure by turning off the instrument panel.
Posted on 19 April 2024 by ScegliAuto
|
How do you replace the belt on the Piaggio Beverly 350?In order to replace the Piaggio Beverly 350 belt, first of all loosen the bolts that secure the protective cover of the crankcase located at the rear wheel. Once the crankcase has been opened, it will be possible to have access to the transmission: it will be necessary to unscrew the nut that fixes the central pin of the variator and also the one that fixes the central pin of the clutch: it will therefore be possible to remove the variator, then the clutch bell and all the his records. This will allow the belt to be removed and replaced; finally it will be possible to assemble all the parts previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |