Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the door on the Acura CL?

Model: Acura Acura Various
Part: Car door

In this tutorial we can see how to adjust the door on the Acura CL, an extremely simple and quick operation. First of all, we take note of the closed position of the door in question, in order to have an estimate of the adjustment to be made, then we open the door itself and, using a 12mm socket wrench, loosen the bolts of both hinges. We then place a jack with a wooden shaft applied underneath the door, lift it up to the ideal height and tighten the bolts. At this point, all that remains is to close the door and verify that the operation has been carried out correctly.

Posted on 6 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Acura Instrument Cluster
How to Set the Clock on the Acura Instrument Cluster
Acura Acura Various To set the clock on the instrument cluster and the onboard computer of the Acura vehicle, turn on the instrument cluster and press the menu button ne…
How to open the locked fuel door on the Acura MDX?
How to open the locked fuel door on the Acura MDX?
Acura Acura Various In the Acura MDX, it may happen that the fuel door gets stuck or shows signs of malfunction, for example due to a fault in the control button or the …
Where is the fuse box located in the Acura Integra
Where is the fuse box located in the Acura Integra
Acura Acura Various If you own an Acura Integra (1990-1993) and want to quickly and safely locate the fuse box in the car, follow the steps outlined below. First, enter …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos