|
Do it yourself
| |||
| ||||
Resetting the Service Light on the Alfa Romeo Stelvio
Model: Alfa Romeo Alfa Romeo Stelvio
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
In this video, you will see how the appearance of the yellow light with the oil symbol alerts you that the mileage for the oil change has been reached, or because the engine oil has degraded due to excessive regeneration of the particulate filter. After performing the oil change, proceed to reset the control and notification system. While seated in the driver's seat, press the Start/Stop button on the steering wheel to turn on the instrument cluster, fully press the accelerator pedal, press the brake pedal seven times, wait one minute, release the accelerator pedal, and turn off the ignition. Wait one minute without performing any actions, then turn the ignition back on: a message will appear confirming the reset.
Updated on 4 November 2026 by ScegliAuto
Related tutorials
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
To reset the Service light on the Alfa Romeo Stelvio, press the accelerator pedal and then press the brake pedal six times. After this operation, tur…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
The Service light that is shown on the instrument panel of the Alfa Romeo Stelvio can be reset by holding down the accelerator pedal and pressing the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Starter Motor on an Opel Corsa?
In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.112
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
