Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Replace the front hood holding pistons on Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Hydraulic pistons
Operation: Replace the front hood holding pistons on Alfa Romeo 156

Let's see how to replace the front hood holding pistons on Alfa Romeo 156. We lift the front hood and put it in safety with a rod; with a screwdriver we detach the metal hooks that block the exhaust piston on both ends (or unscrew the locking pins). We mount the new piece on the car, put the piston in safety with the metal clips / pins. We proceed in the same way for the disassembly / assembly of the twin piston. Finally we test the previously mounted gas pistons: we open and close the hood (we adjust the pins).


Posted on 28 October 2023 by ScegliAuto



How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t
Disassembly of the front bumper of an Alfa 156
Alfa Romeo 156 (1997-2007 / MK 1) Is the bumper of the Alfa Romeo 156 damaged and cannot be repaired? Let's see how the car is removed from above. We open the front hood; we remove th
How to replace the battery of the Alfa Romeo 156 key
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to find out how to replace the button cell battery inside the key, all you have to do is read the following gui

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos