Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to remove the knob of an Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Gear Shift Knob
Operation: How to remove the knob of an Alfa Romeo 156

Do you want to replace the gear knob on your Alfa Romeo 156? Let's see how to do it in this video. Remove the frame of the leather cap with a plastic lever; take the knob in your hands and rotate it to the left and right until it is removed from the shift rod (we cut the plastic clamp if present). To carry out the assembly: take the new knob and insert it into the rod on the central tunnel, tighten the same in the rod; we mount the new leather cap with clips. Finally, we test the correct assembly of the knob with the movement of the rod on the central tunnel.


Posted on 22 November 2023 by ScegliAuto



How do you replace the gear knob on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the gear knob of the Alfa Romeo 156 you have to unscrew the knob so that it is removed from the final part of the lever, giving a
How to remove the gear knob and the steering wheel of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial we will see how to remove the gear knob and our steering wheel on the Alfa Romeo 156, in simple steps; in this case we will de
How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos