Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Timing belt

Video tutorial

Today, our tutorials are here to assist you in replacing the timing belt on the Alfa Romeo Stelvio. To perform the timing belt replacement safely, it is necessary to disconnect the negative terminal of the battery and then proceed to remove the components located inside the engine compartment, such as the air duct, the air filter box, and the windshield washer fluid reservoir.

After removing these initial parts, you need to remove the accessory belt, then take off the timing cover by bringing the engine to top dead center and aligning the marks. This step is crucial to avoid causing serious damage to the timing.

Loosen the tensioner to remove the belt, pulleys, and rollers using the removal kit. Replace the tensioner roller and the guide rollers. Install the new timing belt, aligning it perfectly with the crankshaft and camshaft.

The timing belt should be replaced at the sixth year of vehicle use or upon reaching 75,000 miles.


Posted on 16 November 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To replace the timing belt in an Alfa Romeo Stelvio, open the hood to access the components inside the engine bay. Once the hood is open, remove the …
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) These brief and simple instructions will show you how to remove and replace the engine oil pressure sensor on an Alfa Romeo Stelvio 2.2 JTDm, as well…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos