Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the engine oil pressure sensor of the Alfa Romeo Stelvio 2.2 JTDm

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years 2016-2024

These short and simple instructions will show us how to disassemble and replace the oil pressure sensor of the Alfa Romeo Stelvio 2.2 JTDm, but also of the Giulia. First, we open the hood and begin to locate the oil pressure sensor, located on the side of the engine block (next to the pulleys of the service belt); then we remove the main pulley to access it, disconnecting the electrical connector and unscrewing the sensor screws to remove it, as shown in the video. Finally, we install the new sensor and then the pulley!

Posted on 21 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Alfa Romeo Stelvio
How to Reset the Service Light on the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…
How to replace the oil and oil filter on the Alfa Romeo Stelvio
How to replace the oil and oil filter on the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Performing an oil change and oil filter replacement on an Alfa Romeo Stelvio vehicle is a fairly simple and quick operation to carry out independentl…
How to Change the Engine Oil and Oil Filter on the Alfa Romeo Stelvio?
How to Change the Engine Oil and Oil Filter on the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video, you will see the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Alfa Ro…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos