|
Do it yourself
| |||
| ||||
How to Replace the Engine Air Filter in an Alfa Romeo Stelvio
Model: Alfa Romeo Alfa Romeo Stelvio
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
To replace the engine air filter in the Alfa Romeo Stelvio, open the hood and locate the air filter box, usually positioned at the top of the engine compartment towards the passenger side. Remove the box cover secured with screws, being careful not to damage it. Pull out the used air filter, noting the position and direction it was installed. Clean the inside of the box from dust or debris before inserting the new filter. Insert the new filter in the same direction and ensure it is properly seated, with the edges sealed correctly. Reattach the cover by securing it with clips or screws and check that it is stable. Close the hood and, if necessary, start the engine to check that the airflow is steady and there are no anomalies.
Posted on 27 March 2026 by ScegliAuto
Related tutorials
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
In this video, you will see the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Alfa Ro…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
To replace the cabin filter in the Alfa Romeo Stelvio, open the glove compartment on the passenger side to access the screws that secure it in place.…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |