Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Replacing the brake pads

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Brake pads
Operation: Replacing the brake pads

Loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel. Unscrew the two screws holding the caliper with an Allen key and remove it by removing the two retaining springs. Check the wear of the stops and piston. Clean the entire braking unit from encrustations. Grease the fixing pins and reposition the piston making sure it works properly. Fit the new pads paying attention to the direction of rotation and installing the one with contacts towards the inside. Carefully reassemble the caliper and springs. Re-establish the position of the pistons with a tool and then acting on the brake pedal. Make sure that the pads adhere perfectly to the disc. Recheck the regular brake fluid level.


Posted on 16 July 2023 by ScegliAuto



How to replace the pads of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) How to replace the pads of an Alfa Romeo 156? Let's see the disassembly of the pads on a front brake disc. We place our car on a jack column bridge),
Guide to replacing brake pads
Alfa Romeo 156 (1997-2007 / MK 1) Is it time to replace the brake pads? No problem, let's arm ourselves with jacks and start the work. First of all we lift the car from the part corre
How to replace front brake pads on Alfa Romeo
Alfa Romeo 156 (1997-2007 / MK 1) Let's see how to replace the front brake pads of an Alfa Romeo. We lift the car on a column bridge (jack) to the desired height, immediately after we

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos