Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

Video tutorial

Unscrew the wheel nuts and lift the vehicle securely. Unscrew the bolts and remove the wheel.

Using a screwdriver and hammer, push out the two clips of the brake shoe spring. Check the brake fluid level and ensure it is not at maximum.

Using a plastic tool, remove the brake pads by extracting them from their seat. Install the new pads, paying attention to the rotation direction stamped on the body.

Before removing the inner pad, disconnect the electrical contact via its connector. Remove the second pad and install the new one, reconnecting the wires.

Refit the spring and the two clips. Refit the wheel.

Recheck the brake fluid level. Reset the position of the pistons by pressing the brake pedal.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacement of Brake Pads
Replacement of Brake Pads
Alfa Romeo 156 (1997-2007 / MK 1) Loosen the wheel nuts and lift the vehicle securely. Unscrew the bolts and remove the wheel. Unscrew the two retaining screws of the caliper with an …
Guide to Replacing Brake Pads
Guide to Replacing Brake Pads
Alfa Romeo 156 (1997-2007 / MK 1) Is it time to replace the brake pads? No problem, grab a jack and let's get to work. First, lift the car on the side corresponding to the wheel where…
Replacing Front Headlight Bulbs on an Alfa 156
Replacing Front Headlight Bulbs on an Alfa 156
Alfa Romeo 156 (1997-2007 / MK 1) Removing the front headlight bulbs? Start by opening the engine compartment. Open the engine compartment of the 156, lift the engine cover, and locat…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos