Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs on an Alfa 156

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight bulb

Video tutorial

Removing the front headlight bulbs? Start by opening the engine compartment. Open the engine compartment of the 156, lift the engine cover, and locate the headlight.

Remove the retaining caps behind the front headlight. Open the front headlight, and extract the damaged bulbs.

Insert new bulbs into the designated housing (bulbs of the same size and voltage). Refit the cap of the front headlight and proceed to replace the bulbs in the other headlight.

Close the rear hatch after installation. Turn on and test the new bulbs.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on an Alfa Romeo 156
How to Replace the Front Headlamp Bulbs on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Follow this guide for instructions on how to remove and replace the front headlamp bulbs on your Alfa Romeo 156. First, open the bonnet of your car a…
How to Replace the Front Headlamp Bulb on an Alfa Romeo 156?
How to Replace the Front Headlamp Bulb on an Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) To replace the front headlamp bulb on the Alfa Romeo 156, open the bonnet to access the engine bay. Here, remove the plastic cap located inside the h…
How to Replace the Front Headlamp Bulb of an Alfa Romeo 156?
How to Replace the Front Headlamp Bulb of an Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) To replace the front headlamp bulb of an Alfa Romeo 156, pry open the lower part of the front grille to access the screws underneath. By unscrewing t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos