Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to replace the rear indicator light bulb on the Alfa Romeo 156?

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Light bulb
Operation: How to replace the rear indicator light bulb on the Alfa Romeo 156?

In order to replace the rear turn signal bulbs of the Alfa Romeo 156, you need to open the tailgate and loosen the nuts that secure the black plastic covers placed on the sides of the boot. Once removed, it will be necessary to disconnect the connector and extract the black support on which the stop and turn signal bulbs are located. At this point it will be possible to remove the affected bulbs from their housing and replace them with new bulbs. The support can then be reinserted into its housing and connected to its connector.


Posted on 29 February 2024 by ScegliAuto



Replacement of the dashboard indicator bulbs of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial we will see how to remove and replace the dashboard indicator bulbs (water, clock and petrol indicator) of the Alfa Romeo 156.
How to replace the headlight bulb on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 156, you have to open the hood to access the engine compartment. Here it will be necessary t
How to replace the headlight bulb on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 156 you have to open the hood, so that you can unscrew the fixing bolts that secure the head

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos