Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to replace the headlight bulb on the Alfa Romeo 156?

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Headlight bulb
Operation: How to replace the headlight bulb on the Alfa Romeo 156?

In order to replace the headlight bulb of the Alfa Romeo 156 you have to open the hood, so that you can unscrew the fixing bolts that secure the headlight inside its housing. Once the headlight has been released, it will be possible to disconnect the connector from its rear part and detach the circular cover inside which the headlight itself is located. In this way it will be possible to remove the bulb from inside its housing and replace it with a new spare part. After replacement, all removed parts can be mounted.


Posted on 20 September 2022 by ScegliAuto



How to replace the headlight bulb on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 156, you have to open the hood to access the engine compartment. Here it will be necessary t
How do you replace the headlight bulb on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) The headlight bulb on the Alfa Romeo 156 is replaced by levering the lower part of the front grille, which must be in such a way as to access the scr
How to replace the headlight bulbs of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the headlight bulbs of the Alfa Romeo 156. First of all, we

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos