Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Alfa Romeo Giulia

Model: Alfa Romeo Alfa Romeo Giulia MK 1 - Years 2016-2024
Part: Key

This guide shows how to replace the remote battery of the Alfa Romeo Giulia Mk2. First, remove the rear cover of the remote and take out the mechanical key. Unscrew the battery compartment cap counterclockwise. Using a small flathead screwdriver, extract the battery and insert the new one. The battery model is CR2032. Refit the battery cover and reassemble the mechanical key. Close the rear cover of the remote and check the remote's proper functioning.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on an Alfa Romeo Giulia
How to Replace the Battery on an Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) Before starting, open the boot lid of your Alfa Romeo Giulia. Begin by removing the side cover of the boot to access the battery. Proceed to loosen t…
How to Replace the Battery in an Alfa Romeo Giulia
How to Replace the Battery in an Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) The starter battery of the Alfa Romeo Giulia is located at the rear, in the boot, directly above the right rear wheel; if you need to replace it and …
Replacing the Key Fob Battery on the Alfa Romeo Giulia
Replacing the Key Fob Battery on the Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) In this short and simple video, you will see how to disassemble and replace the battery in the key fob of the Alfa Romeo Giulia, as well as the Stelv…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos