Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Injectors from the Alfa Romeo 147 1.9 JTDm

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel injectors

Video tutorial

In this video, you will learn how to remove and replace the diesel injectors of the Alfa Romeo 147, following the instructions below. First, open the bonnet and disconnect the electrical connectors of the diesel injectors.

Next, remove the metal clips for each injector, as shown in the video. At this point, use a socket spanner to unscrew the fixing screws of the wiring, moving them aside.

Now, remove the injectors and replace them, if necessary, with the correct new ones. Then, reassemble everything!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Removing the EGR Valve from the Alfa Romeo 147 1.9 JTDM
Removing the EGR Valve from the Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, you will learn how to remove and replace the EGR valve of the Alfa Romeo 147 1.9 JTDM by following these simple steps. First,…
How to Replace the Timing Belt on an Alfa Romeo 147 1.9 JTDM
How to Replace the Timing Belt on an Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) Changing the timing belt on an Alfa Romeo 147 1.9 JTDM is a complex task that requires a certain level of mechanical experience, so it is always advi…
Replacing the Oil Heat Exchanger of the Alfa Romeo 147 1.9 JTDM
Replacing the Oil Heat Exchanger of the Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) Discover the main steps to remove and replace the oil heat exchanger of the Alfa Romeo 147 1.9 JTDM. First, open the bonnet of your car and start by …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos