Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 147
  6. : Replacement of the heat exchanger of the Alfa Romeo 147 1.9 JTDM

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Operation: Replacement of the heat exchanger of the Alfa Romeo 147 1.9 JTDM

Let's find out the main steps to disassemble and replace the oil cooler of the Alfa Romeo 147 1.9 JTDM. First of all we open the bonnet of our car and start by disassembling and removing the coolant tank; to do this, first disconnect the antifreeze hose from under the car, as shown in the video. At this point we remove the upper protection of the motor and we go to unscrew the screws of our exchanger; we just have to remove it and replace it with the new one, following the video tutorial to the end!


Posted on 26 March 2024 by ScegliAuto



Removal of the EGR valve of the Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial we will see how to disassemble and replace the EGR valve of the Alfa Romeo 147 1.9 JTDM, following these simple steps. First o
How to replace the timing belt on Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) Changing the timing belt on an Alfa Romeo 147 1.9 JTDM is a complex operation that requires a certain amount of mechanical experience, therefore it i
Disassembly of the injectors of the Alfa Romeo 147 1.9 JTDm
Alfa Romeo 147 (2000-2010 / MK 1) Let's see in this video how to disassemble and replace the diesel injectors of the Alfa Romeo 147, following the instructions below. First we open th

    Frequently Asked Questions

    • 147 2000-2010 - Why does the "code system failure" message appear on the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - What is the cost for transferring ownership of an Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Where is the Alfa 147 f60 fuse located? Read Answer
    • 147 2000-2010 - What warning lights are there on the dashboard of the Alfa 147? Read Answer
    • 147 2000-2010 - What is the code system fuse on the Alfa 147? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos