Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Armrest on the Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Center console tunnel

Video tutorial

To install the armrest on the Alfa Romeo MiTo, insert the base of the armrest into the storage compartment behind the handbrake: mark the positions of the holes on the base of the armrest so that holes can be drilled in the storage compartment. This way, you can insert the base and secure it with the appropriate screws: now position the armrest upright on its base and secure it with the bolts that attach the armrest to the base.

After installation, ensure that the piece is correctly fitted.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
Removing the Gear Knob on Alfa Romeo Mito
Removing the Gear Knob on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this tutorial, we will see how to remove and replace the gear knob on an Alfa Romeo Mito by following these simple steps. First, get inside the ca…
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos