Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Alfa Romeo 147 Using Multiecuscan Software

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Service warning light

In this tutorial, you will see how to reset the service light on an Alfa Romeo 147 using Multiecuscan software, a very simple and quick operation. First, connect the PC with the software installed to the vehicle's OBD port, then turn on the ignition. If it is not already set, change the unit of measurement to kilometres. Next, select the car model in Multiecuscan, enter 'Service Interval Reset', navigate to the 'Adjustments' window, and perform the reset by pressing the 'Execute' button located at the bottom right.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on the Alfa Romeo 147 - GT
Reset the Service Light on the Alfa Romeo 147 - GT
Alfa Romeo 147 (2000-2010 / MK 1) This guide provides the main instructions to reset the service light on the Alfa Romeo 147, as well as the GT. First, get inside the vehicle and conn…
Removing the Glove Box of the Alfa Romeo 147
Removing the Glove Box of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Below are the necessary steps to remove and replace the glove box of the Alfa Romeo 147, following the instructions provided. First, get inside the v…
How to Remove the Alternator from an Alfa Romeo 147
How to Remove the Alternator from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this brief guide, you will find instructions to remove and replace the alternator on an Alfa Romeo 147. First, open the bonnet of your car and sta…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos