|
Do it yourself
| |||
| ||||
Where is the coolant reservoir located in the Alfa Romeo Giulietta and how to replace it?
Model: Alfa Romeo Giulietta
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
This video shows where the coolant reservoir is located in the Alfa Romeo Giulietta and how to replace it, a very simple and quick operation. As shown, it is located in the engine bay on the right side, which is to our left when looking at the vehicle from the front. If you need to replace it, first remove the fluid inside using a pump, then unscrew the two fastening bolts with a 10mm socket. Once done, loosen the two metal clips, disconnect the hoses, connect them to the replacement part, and reassemble everything.
Updated on 11 June 2026 by ScegliAuto
Related tutorials
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
To replace the fuel filter on an Alfa Romeo Giulietta, open the bonnet to access the engine bay: the filter is located just in front of the tank cont…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
From underneath the car, remove the undertray plastic using the screws on the bulkhead to access the radiator drain tap. Before opening the tap and r…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
In the following video, learn where and how to remove the thermostat on an Alfa Romeo Giulietta. Unscrew the bolts on the thermostat hose cap as show…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Cabin Fan in the Nissan Qashqai?
The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |