Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter in the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

The cabin filter in the Alfa Romeo Stelvio is located in a somewhat inconvenient spot, but the good news is that you don't need to disassemble anything to access it. It is located behind the glove compartment on the passenger side, like in many other car models, but you can reach it with one hand without taking anything apart, although you will need to lie down with your head facing down on the vehicle's floor mat. Additionally, there is no cap to unscrew: it is simply accessible by pulling it out by hand.

You can find it for $16.58 on Amazon plus $3.99 for shipping.

We recommend thoroughly cleaning the area where the dirty filter was located with a blast of compressed air before reinstalling the new, clean one. Pay attention to the installation direction: the arrows should always point downward.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To replace the cabin filter in the Alfa Romeo Stelvio, open the glove compartment on the passenger side to access the screws that secure it in place.…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video, you will see the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Alfa Ro…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos