Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to deactivate the Start - Stop on the Giulietta Alfa Romeo

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: -board computer
Operation: How to deactivate the Start - Stop on the Giulietta Alfa Romeo

In this video we show you how to disable the start-stop from the Giulietta Alfa Romeo. First insert the key into the ignition and turn on the instrument cluster. Then insert the OBD device for engine diagnostics into the appropriate socket that you will find on the left side of the steering wheel at the bottom. Download the application on your device (mobile phone, tablet or PC) and connect it via bluetooth to your OBD. Once inside the application, search for the make and model of your car and select the service you need to deactivate, in this case Stop&Start. On the window that will appear select 'Not present' and give ok. Wait for it to run the deactivation process after which you exit the application. Turn off the instrument panel and wait a few seconds before turning it on again and starting the engine. At this point the service is deactivated.


Posted on 27 December 2022 by ScegliAuto



How to replace third stop on Alfa romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) The replacement of the third stop on the Alfa Romeo Giulietta can easily be done by yourself: since the third stop is integrated in the spoiler, it i
How to reset the Alfa Romeo Giulietta Start & Stop system?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to reset the Start & Stop system of the Alfa Romeo Giulietta, it is necessary to disconnect the cables connected to the battery, and eventua
How to deactivate the buzzer on the seat belts of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to deactivate the buzzer on the seat belts of the Alfa Romeo Giulietta, the belt must be removed, in particular by removing the black cover

Other guides that may interest you

    Frequently Asked Questions

    • Giulietta 2010-2020 - What does the warning light "have engine checked, start and stop not available" in the Alfa Romeo Giulietta? Read Answer
    • Giulietta 2010-2020 - What warning lights are there in the dashboard of the Alfa Romeo Giulietta? Read Answer
    • Giulietta 2010-2020 - What to do in the event of an expired service on the Giulietta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos