Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on an Alfa 147 JTD

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Fuel injectors

To replace the injectors on a turbo diesel engine from the Multijet series of the Fiat Alfa Romeo group, follow these steps: open the bonnet, remove the engine cover, and disconnect the breather pipe above the four injectors. Start by unscrewing the nut that secures the fuel supply pipe to the injector, first from the injector side and then from the fuel rail side. Use a socket spanner to remove the injector fastening nut, and finally, disconnect the clip. At this point, the injector can be removed.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Replacing the Clutch Slave Cylinder of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) This guide outlines the main steps to disassemble and replace the secondary cylinder or clutch pump (of the clutch diaphragm) of the Alfa Romeo 147 1…
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Alfa Romeo 147 (2000-2010 / MK 1) Today, we will go through the steps to replace the engine oil and oil filter on an Alfa Romeo 147 with a 1.9 JTD engine. First, open the bonnet of yo…
Guide to replacing the clutch of the Alfa Romeo 147 1.9 JTD
Guide to replacing the clutch of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) In this guide we will see the main instructions that will allow us to disassemble and replace the clutch kit on the Alfa Romeo 147 1.9 JTD. First of …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos