Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Dynamic LED Indicators on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Side marker light

Video tutorial

In this video tutorial, you will see how to replace the original indicators on the Alfa Romeo Giulietta with dynamic LED indicators. The first step is to purchase dynamic LED indicators from the brand ESSELLE that are approved.

Secure the vehicle with the handbrake engaged, pull the bonnet release lever, and lift the bonnet, securing it with the appropriate prop. The operation is very simple; just remove the original indicator and disconnect the cable attached to it. Once the bonnet is open, you will find a space on the side where you can insert your hand to disconnect the clip holding the indicator, then disconnect the connector and fit the new indicator.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Set the Time on an Alfa Romeo Giulietta
How to Set the Time on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…
How to replace the clutch in an Alfa Romeo Giulietta
How to replace the clutch in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the clutch in an Alfa Romeo Giulietta, start by disconnecting the negative terminal of the battery and lifting the car safely and securely…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos