Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. Giulietta
  6. : How do you replace the internal handle of the Alfa Romeo Giulietta?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Handle
Operation: How do you replace the internal handle of the Alfa Romeo Giulietta?

In order to replace the internal handle of the Alfa Romeo Giulietta, you need to loosen the screws that fix the door panel so that it can be removed from its housing. After the panel has been detached, it will be possible to loosen the screws that secure the internal handle mechanism from the inside. By also disconnecting the connector located inside, it will be possible to connect the new handle to it, positioning it in the panel's seat. After the new handle has been positioned, it will be possible to verify that everything functions correctly.


Posted on 14 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos