Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio, Satellite Navigator, and Centre Console Dashboard

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

Video tutorial

Due to the delicate nature of this task, it is recommended for those with some experience. Remove the gear cover and the corresponding plastic panel by prying at the edges with a plastic tool.

Disconnect the wiring of the switches and slide it off the gear lever. Unscrew all the screws of the radio and navigator trim.

Gently remove the trim by prying on all sides, then also remove the complete dashboard by carefully extracting it from its housing. Remove all wiring from the back until it is completely detached.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Removing the Radio from an Alfa Romeo 156
Removing the Radio from an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This guide covers the removal of the radio from an Alfa Romeo 156. Use the removal keys to take out the radio. Insert the keys into the holes on the …
How to Replace the Radio in the Alfa Romeo 156
How to Replace the Radio in the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Below are the instructions that will allow you to remove and replace the standard radio in the Alfa Romeo 156, in simple steps. First, get inside the…
How to Remove the Gear Knob of an Alfa Romeo 156
How to Remove the Gear Knob of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Want to replace the gear knob on your Alfa Romeo 156? Follow this guide. Use a plastic lever to detach the leather gaiter frame; take the knob in you…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos